[ZIDA FAQ] [QDI Legend FAQ] [QDI Titanium FAQ]
Q1.- After I installed Windows95 in Tomato BX/LX/TX mainboard, I found that there were two exclamationmarks in the Device Manager (next to "PCI bridge" and "PCI card"). Why? How can I solve this?
Q2.- How can I get the USB drivers for my Tomato mainboard?
Q3.- I have just bought a Tomato Pentium motherboard to upgrade my 486 system.After installing all things and restart the system, my mouse don't work.Why?
Q4.- I have a Tomato HX mainboard 5DHX. Can I have a BIOS upgrade so that Ican use the AMD K6 CPU?
Q5.- Do Tomato boards support IOMEGA ZIP drive and LS-120 drive?
Q6.- What is "Auto Jumper Yes"?
Q7.- Why Tomato TX/LX mainboards cannot recognize some Seagate Harddisks?
Q8.- In the Auto Jumper Mode of 5DTX-TC / 5DTX-JY, after changing the CPU type,sometimes the system is unstable. Why?
Q9.- Does my Tomato mainboard Year 2000 compliant?
Q10.- How do I enter CMOS setup?
Q11.- Why some of the jumpers in the mainboard do not have descriptionof their usages in the user manual?
Q12.- What is the latest BIOS for my mainboard?
Q13.- Where can I get the Bus Mastering Driver for my mainboard?
Q14.- My computer does not see my CD-ROM (Secondary HDD). What should I do?
Q15.- How do I know which PCB Revision my mainboard is?
Q16.- I have bought a Tomato 5DLX / 5SVA-J98 today. It works good and fast,but when it gets into Windows95, always lookingfor the PCI EARLY NON-VGA DEVICE driver. Iinstalled the VIA busmaster driver but still looking for the driver after rebooteach time. Do you have the driver for that?
Q17.- Why my system restarts/hangs up instead of power off when I shut downin Windows95? I am using Tomato ATX Mainboard.
Q18.- I am using Quantum Fireball SE 4.3GB and 2.1GB harddisks with Tomato 6DLXmainboard. When I install Windows95 into my computer, the installationcannot be completed. What can I do?
Q19.- Everytimes when I want to clear the CMOS data, it is very inconvient tome since I need to open the case cover, ... and so on. Does yourmainboard have a better solution on this?
Q20.- I'm using Tomato mainboard with Intel chipsets and Windows95 TraditionalChinese Version. After I install the drivers for the mainboard, some chinesecharacters are missing. Why?
Q21.- I'm using the Tomato 5SVA motherboard. Can I use the 64MB DIMM?
Q22.- I'm getting a "memory conflict with AGP controller" error whenI install an AGP VGA card under Win95 OSR2. What's the problem?
Q23.- What do beep codes mean?
Q24.- What is PC100 compliant SDRAM?
Q25.- I install Windows95 OSR 2.x with ATX power supply. When I shutdown thesystem, it restarts instead of power down. Why?
Q26.- I'm using Tomato board. I don't have the M/B drivers for Windows98. Whatshould I do?
Q27.- Which TomatoBoards support Celeron 266/300MHz?
Q28.- Which TomatoBoards support AMD K6 CPU 266/300MHz?
Q29.- Which TomatoBoards support 6x86MX PR233?
